Clay is an essential resource for the construction industry, especially in the South, where it is widely distributed. In the production process, the simple method of drying clay naturally causes the supply of dry clay to be tight, which affects the normal production. Therefore, mechanized drying of clay is an important condition to ensure production.
In cement production, clay dewatering and drying is a very important process. Due to the high moisture content of clay, if the drying effect is not properly treated, the output of the raw mill will be affected, and in severe cases, it may lead to the problem of the ring of the raw mill. In this case, the clay dryer naturally becomes an indispensable dewatering equipment in cement production. Especially the multi-layer dryer plays an important role in the drying of clay.
The multi-layer dryer is composed of three concentric cylinders, which are inner, middle and outer. The transformation of the internal structure increases the pre-drying of materials in the machine, and prolongs the drying time of wet materials in the machine. Compared with the single-cylinder dryer, the multi-layer dryer has better airtightness and stronger thermal insulation performance of the cylinder. Coupled with reasonable supporting measures, the multi-layer dryer can not only dry the clay It greatly improves the utilization rate of thermal energy resources, achieves the effect of energy saving and emission reduction, and also improves the output and quality of the equipment to achieve the purpose of high-efficiency operation.
If your clay processing site is wide, using a tumble dryer is also a good choice. The equipment is simple in structure, easy to maintain, and more importantly, has a strong dewatering capacity, which can be used for continuous construction operations, and is suitable for drying a large amount of clay.
Regardless of the above drying equipment, it has high efficiency, energy saving, environmental protection and low carbon performance, and is widely used in the drying of clay, slag powder, iron ore and other mixed materials in various industries. The drying and dehydration of raw materials in industries such as dry-mixed mortar, yellow sand and chemical foundry is also more effective.
