The through-flow dryer is a common device in dehydration and drying production in all walks of life. It is popular among users for its high quality. With the continuous development of drying technology, there are many types of through-flow dryers, and the reducer is an important condition to ensure the smooth progress of drying operations.
Through-flow dryer equipment in the production workshop
First of all, when we choose a reducer for a through-flow dryer, we focus on its quality. If the material used for the reducer is not good, the hardness is not enough, and the wear resistance is not high, it is prone to serious wear and tear, which greatly shortens its service life. Therefore, the quality problem is the key condition for us to choose the speed reducer for the through-flow dryer. At the same time, in order to facilitate movement, try to choose a small and light reducer.
Secondly, it is necessary to ensure the transmission efficiency and bearing capacity of the through-flow dryer reducer. In general, when the reducer adjusts the cylinder speed, the requirements for power transmission efficiency are quite high. Therefore, in order to ensure the effectiveness of the speed adjustment of the through-flow dryer, a transmission rate greater than 95% is required.
Make sure that the selected reducer model matches the power of the through-flow dryer. In the drying production line, every component and auxiliary equipment affects to a certain extent whether the drying operation can be completed smoothly, which requires us to choose the matching dryer according to the size of the through-flow dryer used. The type of reducer, so that it can meet the demand in terms of production line efficiency and quality.
Of course, no matter which type of reducer is selected, correct operation and reasonable maintenance are inseparable from actual production operations, so as to more effectively ensure the long-term and stable operation of the entire drying production line. Here, Baoyuan Machinery reminds users and friends that during the use of the equipment, once abnormal problems are found, they should be investigated and solved in time, so as to ensure the good performance of the reducer and various equipment.