Recently, a user consulted by telephone. When using the drum modified drying equipment to dry the materials, during the normal operation process, the work efficiency of the production line suddenly decreased, resulting in a great impact on the output.
1. When we are feeding the drum scraper drying equipment, if the amount of feed is suddenly reduced, it will cause too little material to be processed in the drum, thereby reducing the work efficiency of the production line. In addition, in the case of improper feeding method, if the amount of feeding is too much, it will cause too much material to accumulate inside the drum scraper drying equipment. The dehydration equipment cannot operate normally, which eventually causes the working efficiency of the drum scraper drying equipment to drop suddenly.
2. When the drum scraper dewatering equipment dehydrates and dries the material, if the moisture content of the feed material is different, in the case that the initial moisture of the feed material increases, and other conditions in the production line remain unchanged, the It will greatly reduce the dehydration speed and prolong the dehydration drying time, which is also one of the reasons for the sudden reduction of the working efficiency of the drum scraper dehydration equipment.
3. When dehydrating and drying the material, the drum scraper dehydration equipment realizes the evaporation and drying of the moisture in the material by heat transfer. If we use the equipment, there is air leakage in the dehydration cylinder, or the thermal insulation performance is not good If it is good, in the case of insufficient heat, low temperature and low utilization of heat energy, it will greatly affect the working efficiency of the equipment.
