With the continuous development of dehydration technology, there are more and more various dehydration equipment, which also causes great trouble for the majority of users to purchase low-temperature dehydration equipment.
First of all, when we buy a low-temperature dehydrator, we must pay attention to the nature of the material to be processed. The material properties mentioned here mainly refer to the water content of the raw materials. Because of different moisture content, the type of dehydrator required is different. In the case of excessive moisture, it is even necessary to configure a certain filter press device. Therefore, the moisture level is one of the important factors affecting the selection of the type of low-temperature dehydrator.
Secondly, when purchasing a low-temperature dehydrator, pay attention to the viscosity of the material. Under normal circumstances, if the viscosity of the material is high, it is not suitable to use a three-channel dewatering device, and a single-cylinder dewatering machine is a more common type. For materials with lower viscosity and better dispersion performance, the three-cylinder dehydrator has better dehydration and drying effect.
Third, choose the appropriate type of low-temperature dehydrator according to the user's requirements for the output of the production line. This is because the output of different models and sizes of low-temperature dehydrators is very different. If the model of equipment we choose is too small, it will not be able to meet the production needs, and if the model of equipment we choose is too large, it will cause waste of thermal energy resources.
Fourth, in order to choose a suitable low-temperature dehydrator, we must also pay attention to the performance characteristics and material quality of all aspects of the equipment. In the face of equipment of different quality, if the material of the low-temperature dehydrator we choose is not good, it will directly affect its due service life and bring about a lot of economic losses to users.
In view of the above-mentioned situations, Baoyuan Machinery hereby advises users and friends that when purchasing a low-temperature dehydrator, be sure to go to a large regular manufacturer, fully communicate the material characteristics and user requirements, and be strict with the manufacturer's strength and equipment quality. Only under the premise of checking, can you buy suitable and durable devices, so as to create greater economic benefits for users.
