Appropriate dehydration and drying of the mud is an important measure to realize the recycling of waste resources and effectively maintain the environment. In the actual production process, sometimes there will be uneven moisture in the discharge after the slurry is dehydrated, which greatly affects the quality of the finished product. So, what are the reasons for the different degrees of drying after dehydration, and how should we deal with them?
1. When we dehydrate and dry the mud, if the initial water content of the raw materials to be processed is different, and other dehydration and drying conditions remain unchanged, the water content of the discharge material will fluctuate greatly. Therefore, before dehydrating and drying the mud material, we should pay attention to the determination of the moisture content of the treated material to ensure that the original moisture of the material is uniform.
2. In the process of mud dehydration, heat temperature is the most critical factor. Once the temperature in the combustion chamber changes widely, it will lead to abnormal temperature in the dehydration cylinder, and correspondingly, it will also lead to the unevenness of the discharge moisture after the mud is dehydrated. Once this situation occurs in the process of material dehydration, we can adjust the temperature of the combustion chamber to make it reach the set temperature parameters, reduce the temperature fluctuation space in the mud dewatering machine, and ensure the uniformity of the discharged water after the mud dehydration. .
3. If we operate the mud dewatering machine, the feeding amount is sometimes too large and sometimes too small, and the feeding speed is fast or slow, which will make the water in the discharged material dry and wet. , the moisture control is more unbalanced. In this case, we can adjust the working frequency and vibration amplitude of the feeding vibration conveying system of the mud dewatering machine to make the material more uniform during the conveying process, reduce the phenomenon of clumping and accumulation, and ensure the uniform performance of the feeding.
